carrier-board-design
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| LVDS Serializer FPD-Link III |
|
1 | 120 | February 24, 2021 |
| Revised iMX8 PMIC Design |
|
3 | 33 | October 26, 2020 |
| Pins on own Carrier Board |
|
3 | 27 | May 6, 2020 |
| Apalis two sided carrier board |
|
5 | 19 | June 1, 2018 |
| Colibri iMX6ULL Design Review and Questions |
|
9 | 28 | April 27, 2018 |
| Missing dimension for custom carrier board |
|
1 | 23 | September 4, 2017 |
| Dimensioned drawing for JTAG pogo pin connector placement on custom carrier board for Colibri VF61 |
|
4 | 50 | July 13, 2017 |
| What is USB_O1_HOST_MODE used for? |
|
1 | 20 | May 15, 2017 |
| Transformer-less (magnetic-less) connection to Apalis TK1 Gigabit Ethernet |
|
2 | 74 | April 28, 2017 |
| TFT LCD hardware design |
|
3 | 10 | March 28, 2017 |
| Apalis imx6 CSI layout signal equalization |
|
2 | 42 | March 3, 2017 |
| CAN Bus Isolation |
|
1 | 42 | February 15, 2017 |
| 24 bit lvds on carrier board for t30 |
|
1 | 29 | February 9, 2017 |
| Disappearing Tracks |
|
2 | 16 | January 5, 2017 |
| Reference design for an USB charger and VF61 |
|
8 | 29 | December 12, 2016 |
| Apalis Module Standoffs |
|
1 | 27 | October 3, 2016 |