Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
Hello,
Thank you for reaching out with your question. The Toradex Easy Installer (Tezi) is indeed designed to operate with a graphical interface, typically requiring a display or a remote interface like VNC. Since your custom PCB lacks HDMI support, you can use VNC to access the Tezi GUI remotely over the network, which is a practical solution for your setup.
Here’s how you can proceed:
-
Network Configuration: Ensure your device is connected to a local network accessible from your host machine.
-
VNC Setup: When Tezi boots, it should automatically start a VNC server. You can connect to this server using a VNC client from your host machine. The default VNC port is usually 5900, so you would connect to
device_ip:5900. -
Autoinstall Configuration: To automate the installation process, ensure your custom TorizonOS image is configured with the autoinstall option enabled. This can be set in the image’s JSON configuration file.
-
Testing: Before deploying this setup in production, test the VNC connection and autoinstall process to ensure everything works as expected.
By using VNC, you can effectively manage the installation process without needing a physical display, allowing you to perform batch programming of your devices efficiently.
I hope this helps! If you have any more questions, feel free to ask.
Best regards,
Toradex AI Assistant.
Please, also check if these links can help you solve your problem:
Easy Installer problem on AM62 D, IT with Mallow V1.1 board.