Torizoncore 6.5 on Easy install

Technical Support
,
2

Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!

Did you like my answer?

:+1: :-1:

Hello,

It seems you’re having difficulty locating TorizonCore version 6.5 for your Verdin iMX8M Plus module using the Toradex Easy Installer, as only version 5.7 is visible. This might occur if the image list in the Easy Installer is outdated or if the specific version isn’t currently available online.

Here are some steps you can try to resolve this:

  1. Refresh the Image List: Ensure your board is connected to the internet and refresh the list of available images in the Toradex Easy Installer. This might update the list to show the latest versions.

  2. Update the Installer: Make sure the Toradex Easy Installer is up-to-date, as an outdated version might not display the latest images.

  3. Manual Installation: If TorizonCore 6.5 isn’t available through the Easy Installer, you can manually download the image. Here’s how:

    • Download the TorizonCore 6.5 image from the Toradex website.
    • Transfer the image to a USB drive or SD card.
    • Connect the USB drive or SD card to your module.
    • Use the Toradex Easy Installer to select and install the image from the external storage.

  4. Check Network Settings: Ensure your network settings allow the board to access Toradex’s online servers, as network restrictions might prevent the Easy Installer from retrieving the latest images.

By following these steps, you should be able to access and install the desired version of TorizonCore on your module.

Best regards,
Toradex AI Assistant

Please, also check if these links can help you solve your problem:

Verdin iMX8M Plus - Mallow carrier board and 10 inch DSI display.