Toradex 24pin camera connector to RaspberryPI camera

[kubaraczkowski]

Hey Toradex,

Do you perhaps sell, or maybe somebody from the community, an adapter board from the Toradex 24-pin MIPI CSI connector to a ‘more standard’ Raspberry PI (15 or 22 pin) one?

Best regards,
Kuba

[ToradexAI]

Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!

Did you like my answer?

---

Based on the provided context, there is no specific mention of an official adapter board from Toradex for converting the 24-pin MIPI CSI connector to a Raspberry Pi compatible connector. It is unclear if such an adapter is available from Toradex or the community. It is recommended to check with the Toradex community or forums for any existing solutions or recommendations for adapter boards that may have been developed by other users.

Please, also check if these links can help you solve your problem:

Any CSI camera for Verdin imx8mm on Dahlia carrier?

I’ve been struggling to get any video from adv7280a-m (See: https://www.toradex.com/community/questions/59268/verdin-imx8mm-dahlia-mipi-csi-from-adv7280m-with-b.html ) While it appears that my 7280 is correctly configured and sending video to the CSI port and v4l2-ctl sees it as a subdevice with adequate inputs, I can’t actually get any valid frames in userland. I decided the next thing to try is to connect some other supported camera to the Dahlia’s CSI interface. I built a small adapter for…

Connecting an OV5640 CSI Camera to an Apalis iMX8QM Evaluation Board

I am trying to get the CSI Camera Module 5MP OV5640 V1.1Z hooked up to the Apalis iMX8QM Evaluation Board Starter Kit but I haven’t been able to find a connector on the eval board that is compatible with the ribbon cable that comes out of the camera senor board. Is there an adapter connector that we have to get in order to get these to connect together or is the connector built onto the eval board somewhere?

CSI Camera Set 5MP AR0521 Color.

[alex.tx]

Toradex does not have such a board and is not aware of one existing. However, you can design it by connecting the matching lines on both types of mating connectors and then order it on JLCPCB or any similar site.