LVDS clock setting IMX6 Apalis

[josep.tx]

Hello @krishnab-a ,
At the moment we don’t have any patches, but there is a similar thread with more information. Hope that it helps.

Wrong LVDS clock Apalis IMX6

Hello, I try to set up a display using LVDS. Therefore, I changed the device tree to adapt the timing and to disable the other framebuffers, so that only LVDS should be used. I have cleared the vidargs variable to use the device tree settings. “fbset” displays the correct frequency of 33.3 MHZ, as set in the device tree. If I measure the LVDS clock, it is only 25.1 MHZ and the output of “cat /sys/kernel/debug/clk/clk_summary” shows that the ldb clock is set to 25.1 MHZ as measured with an os…

Best regards,
Josep