Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
To use the Toradex Easy Installer (Tezi) on your Mallow Carrier Board with a Verdin iMX8MM and get video output via HDMI, you will need to use the Verdin DSI to HDMI Adapter. Here are the steps you can follow:
-
Connect the Verdin DSI to HDMI Adapter:
- Attach the Verdin DSI to HDMI Adapter to the MIPI® DSI connector on your Mallow Carrier Board.
-
Setup Cables:
- Connect all necessary cables to your Carrier Board, including the HDMI cable from the Verdin DSI to HDMI Adapter to your display/monitor.
- Ensure the display/monitor is connected before powering on the board, as HDMI hotplug is not supported.
-
Download and Prepare Tezi:
- Download the Toradex Easy Installer image from the Toradex website.
- Unzip the downloaded package.
-
Put Your SoM in Recovery Mode:
- Follow the instructions to put your Verdin iMX8MM into recovery mode. This typically involves using a specific button combination or jumper settings on the carrier board.
-
Load Tezi:
- If using the USB OTG approach, connect the USB OTG cable from your host computer to the carrier board.
- Run the appropriate script from the unzipped Tezi package on your host computer to load the installer into the module’s RAM.
-
Boot Tezi:
- Once Tezi is loaded, the GUI should appear on your HDMI-connected display.
If you encounter any issues or need further assistance, you can refer to the Toradex Community or Technical Support Channels for help.
Please, also check if these links can help you solve your problem: