Disable PCIe on Apalis IMX6 BSP

[josep.tx]

Hello @Pipe ,
Here you have a topic from a customer with a similar problem , but on TorizonCore. Hope that it helps.

Apalis i.MX6 GPIO control

Hi @Svetoslav , Yes, adding all the banks to the docker-compose worked. I can read all the pins except one. The only issue right now is with GPIO bank 1, offset 2 (MXM3 pin 15). For some reason I get an error trying to read or write information on it in the following way gpiod_ctxless_get_value(“gpiochip0”, 2, false, “gpio-toggle”); . For example with GPIO bank 1, offset 6 (MXM3 pin 17) I can read value with gpiod_ctxless_get_value(“gpiochip0”, 6, false, “gpio-toggle”); I couldn’t find anyt…

Best regards,
Josep