Windows CE8 Debugging over USB

Technical Support
, , , ,
7

The following instructions for enabling USB debugging were provided to our team:

  1. Boot the device
  2. Open Registry Editor (Start->Programs->ColibriTools->RegEdit)
  3. Open [HKLM\Drivers\USB\FunctionDrivers]. Change the value of “DefaultClientDriver” and set it to the value
  4. “RNDIS”. Save the registry and reboot the device.

After that you should have 2 network devices and you can configure a static IP on the PC and WinCE device.

We also found that we had to create a rule in Windows Firewall on our Windows 7 PC to allow the target to communicate with the PC. Without this pass through in the firewall, pings from the target to the PC over the RNDIS interface were unsuccessful.