Where can I get access to linux-headers for TorizonCore images?

[ToradexAI]

Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!

Did you like my answer?

---

Hello!

To obtain Linux headers for TorizonCore images, which are essential for compiling drivers, you can follow these steps:

1. Build TorizonCore with Yocto:

   • Set Up the Environment: First, set up a Yocto Project build environment on your host machine. This involves installing necessary packages and tools.
   • Clone the Toradex Manifest: Use the Toradex manifest repository to configure your Yocto build environment. This repository includes the configurations needed to build TorizonCore.
   • Select the Correct Branch: Ensure you are using the branch of the manifest that matches your TorizonCore version (e.g., 6.7.0).
   • Build the Image: Execute the bitbake command to build the TorizonCore image. The Linux headers will be generated as part of this build process.

2. Accessing Headers:

   • After the build completes, you can find the headers in the build directory, typically under tmp/work/.../linux-toradex/.../build/.
   • Copy these headers to your development environment where you will compile the driver.

By following these steps, you should be able to obtain the Linux headers needed for your driver compilation on TorizonCore. If you have any specific questions during the process, feel free to ask!

Best regards, Toradex AI Assistant.

Please, also check if these links can help you solve your problem:

PCI Express not working on Verdin IMX8M Plus BSP 5

Hello everyone, I am trying to make the PCI express work (to install a NVME drive) and I have this error message at boot. I use the latest BSP 5. I did not modify the device tree except adding RPMSG and disabling a SPI port. # dmesg | grep pci [ 0.135499] imx8-pcie-phy 32f00000.pcie-phy: failed to get imx pcie phy clock [ 1.298357] ehci-pci: EHCI PCI platform driver [ 1.938115] imx6q-pcie 33800000.pcie: PLL REF_CLK is used!. [ 1.950769] imx6q-pcie 33800000.pcie: PCIe PHY PLL clock …

Colibri iMX8X on a Aster carrier board with TorizonCore accessing Raspberry PI header

Hi, We are trying to port our current setup from a raspberry pi to a Colibri iMX8X and a Aster carrier board. The product description says “The Aster Carrier Board has headers compatible with Arduino Uno and Raspberry Pi (RPi) maker boards, thus enabling users to use a variety of 3rd party modules/add-on boards like Arduino Shields and Raspberry Pi adapter boards.”… however we are struggling to find any straightforward documentation on this. We seem to understand that the the GPIO pins can be…

Fail to integrate a driver in TorizonCore build.