Hi, I have no experience with usb protocol but basically I would like to connect the Verdin over usb to a PC and see it as a mounted drive. From the Dahlia datasheet on Verdin USB_1 Port: [image] I see that this should be possible, but just connecting a USB-C cable between my PC and Verdin X3 c…

I managed to make RNDIS protocol work following this extensive topic: [image] Enabling USB Client feature in Torizon Technical Support I’m using Torizon with a Colibri iMX7D 1GB on an Iris dev board (And one of my own board designs). I need to enable the USB client driver…

Verdin USB OTG Slave

Technical Support

josep.tx January 27, 2023, 4:13pm 8

Hello @swiss ,
Did you have a look at this thread too?

Best regards,
Josep