Translate video from usb-cam on external device (or network)

OS - Angstrom v2015.06 - Kernel3.14.28-V2.5b3+g0632def
Hardware : Freescale i.MX6 Quad/DualLite (Device Tree)
model name : ARMv7 Processor rev 10 (v7l)

Hi guys!
How i can push video-thread with usb-cam, connected on my hardware and share this with other pc? What i can install software for this fix solution? My hardware not use GUI, only terminal

Hi @MikeRy,

Welcome to our community :rocket: ! Can you please confirm which module and carrier board are you using? Are they Toradex Products?

Best regards,

Ok, i attached two photo.
Which info you need?)

Dear @MikeRy,

It seems that the Operational System Setup that you have is not accordingly to our Releases. Would you be able to update it accordingly? Embedded Linux Release Matrix | Toradex Developer Center. This way, we’ll be better suited to support you as Kernel 3.14 is not used on any of the LTS releases.

To flash a new image you can use this procedure: iMX Recovery Mode | Toradex Developer Center.

You may then, want to have a look on that page to understand more about cameras and Linux: Camera on Toradex Computer on Modules | Toradex Developer Center

Please tell me if this helps you.

Hi @MikeRy, do you have any news on this topic?

Best regards,