Can pin 50 of the Colibri iMX8X be used as the “RMII_CRS_DV” input for ethernet RMII ? If so, what “ALT” mode is required for this functionality?
The Colibri documentation needs more clarification and definition when using RMII.
Thanks
Can pin 50 of the Colibri iMX8X be used as the “RMII_CRS_DV” input for ethernet RMII ? If so, what “ALT” mode is required for this functionality?
The Colibri documentation needs more clarification and definition when using RMII.
Thanks
Yes
ALT 3 - CONN.ENET1.RGMII_RX_CTL
Please check NXP i.MX 8DualX/8DualXPlus/8QuadXPlus Applications Processor Reference Manual Chapter 14.6 Ethernet MAC (ENET) for more clarification and definition about using RMII.