Hi @Ouseppachan,
I tested the SDK and got the below error
“MCUXpresso IDE was unable to load …”
Referring to the documentation MCUXpresso_IDE_User_Guide.pdf sec 4.2.2
Important Note: Only SDKs built specifically for MCUXpresso IDE are compatible with MCUXpresso IDE. SDKs created for any other toolchain will not work! Therefore, when generating an SDK be sure that MCUXpresso IDE is specified as the Toolchain.
From NXP SDK builder, there is no such toolchain at the moment for the required SDK, therefore, it does not seems to be compatible.
The SDK is provided by nxp only and not available from Toradex.
You can go with other IDE mentioned in the document.