Install Torizon OS in Offline installation without enter to recovery mode

[ToradexAI]

Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!

Did you like my answer?

---

Hi Ahmed49,

Yes, it is possible to install Torizon OS without entering recovery mode, especially if you have already enabled auto accept license, auto install, and auto reboot. Here are the steps you can follow to achieve this:

1. Prepare the USB Device:

   • Use the TorizonCore Builder tool to create your customized Torizon OS image.
   • Copy the customized image to a USB device.

2. Configure the SoM for Auto-Installation:

   • Ensure that the Toradex Easy Installer is configured to automatically start and install the image from the USB device. This can be done by setting the appropriate configuration files on the USB device.

3. Boot the SoM:

   • Insert the USB device into the Verdin Development Board.
   • Power on the SoM. The Toradex Easy Installer should detect the USB device and start the installation process automatically based on the configurations you have set (auto accept license, auto install, auto reboot).

4. Monitor the Installation:

   • The SoM should automatically install the customized Torizon OS and reboot without requiring manual intervention.

By following these steps, you should be able to install Torizon OS on your Verdin iMX8MP without needing to enter recovery mode.

If you encounter any issues or need further assistance, please refer to the Torizon documentation or reach out to Toradex support.

Best regards,
[Your Name]

Please, also check if these links can help you solve your problem:

IMX8MP Sharing GPIO With Coprocessor

Hello, On prior products where we did not use a SOM - we could carefully select IMX pins and GPIO banks such that the coprocessor (M4, FreeRTOS) and main processor (A9, Linux) did not conflict, and we could have exclusive access to interrupts and the GPIO peripheral on each. This is required even if we make use of the semaphore resource protection locks - because of the use of interrupts. We also have a decent bit of high speed GPIO. Am I mistaken in seeing that this is essentially impossible…

Build custom Torizon OS with and without containers

I’ve already setup a tcbuild.yaml to create a TEZI image containing: custom Torizon OS (device trees, kernal arguments, …) containers This works as expected, and I can install it when the SoM runs Toradex Easy Installer. Now I’ve been starting playing with Torizon Cloud, and I tried to upload my custom Torizon OS. But the requirement is that I must provide A .tar file containing the Torizon OS Image with no-container pre-provisioned for offline installation. Should I build a different v…

TorizonCore Builder Tool “build” command | Toradex Developer Center.