Toradex Community

IMX8QM Using LVDS1 I2C as general purpose I2C

Technical Support

apalis, imx8, device-tree

jjdang January 19, 2024, 8:45pm 2

related links that start to but dont fully answer my questions:

NXP Community – 11 Feb 22

How to use I2C0 via LVDS0 on iMX8?

Hi community! I'm trying to use the I2C0 via the LVDS0 block to configure a serializer. I don't understand why the i2c0_lvds0 node is not defined in the file imx8qm-ss-lvds.dtsi. Only i2c1_lvds0 is there: i2c1_lvds0: i2c@56247000 { compatible...

Enable IC2-6 on the Apalis iMX8QM 4GB WB IT V1.1C Technical Support

Dear Toradex community, we are currently try to enable the IC2-6 (Pins 87/99) on the Apalis iMX8QM 4GB WB IT V1.1C via the device-tree for Torizon. We have successfully used IC2-2 (Pins 209/211) with the folling modification to a device-tree: /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ // Touch connected to lvds2 &i2c2 { status = "okay"; } The Problem is that the label &i2c2 does existis with our includes: #include "imx8qm-apalis-v1.1.dtsi" #include "imx8-apalis-eval.d…

show post in topic

Home
Categories
FAQ/Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled