iMX7 Windows Embedded Compact Bringup

Hi,

I am trying the bring up of WEC images for iMX7 with a Colibri Eval Board with Rev.3.2. I tried following the steps here:

After following step 7 i get the proper messages as has been described in the link:
[upload|FUscnAOG08x77Z1dxxbZv4iEX7g=]

After this the steps are not clear. I rebooted the target and can see that it boots into uboot but not eboot.
[upload|kVfWP2txKynXT8WdUSqj6DoeeGo=]

I need to get the board working for WEC images. Any pointers would be helpful.

Regards,
Balaji.

Hi,

I see you are using module with 1GB of RAM and eMMC? Is this correct?
If yes this is not support on WinCE. To get more information about this please contact email support (support@toradex.com ) and reference this thread.