Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
Hello Raj Kumar,
Based on the context provided, here are some steps you can take to troubleshoot the issue with the I2C bus on your Verdin development board:
-
Verify I2C Configuration: Ensure that the I2C bus is properly initialized in Torizon OS. Double-check the configuration settings to make sure they match the requirements for your connected devices.
-
Check Connections: Confirm that the correct pins (sodium 12 and 14) are being used for I2C communication and that all necessary jumpers are connected. Inspect the physical connections to ensure they are secure and correct.
-
Power Supply: Make sure that the connected I2C devices, such as temperature sensors and EEPROMs, are powered correctly. An insufficient power supply can prevent devices from being detected.
-
Use I2C Tools: Since you have already used I2C tools for testing, consider running additional diagnostics to see if there are any error messages or logs that could provide more insight into the issue.
-
Hardware Check: Examine the hardware for any potential issues, such as faulty connections or unresponsive devices. Testing with a different set of devices or cables might help isolate the problem.
-
Consult Documentation: If the issue persists, refer to the Toradex documentation for any specific troubleshooting steps related to the Verdin development board and the i.MX8M Plus SoM.
-
Contact Support: If none of the above steps resolve the issue, consider reaching out to Toradex support for further assistance.
By following these steps, you should be able to identify and resolve the issue with the I2C bus on your development board. If you need further help, don’t hesitate to contact Toradex support.
Please, also check if these links can help you solve your problem: