Https://community.toradex.com/u/hfranco.tx

[gagangowda]

Hi @hfranco.tx

In the SOM board, I would link to modify the device tree for SPI slave configuration. let me know the changes to be done in the device tree.
Device tree name - (imx6ull-colibri-eval-v3.dtsi) and ( imx6ull-colibri.dtsi).
The software details -( Linux colibri-imx6ull-07137088 5.4.193-5.7.0+git.f78299297185 #1 SMP Mon Jul 11 14:42:03 UTC 2022 armv7l armv7l armv7l GNU/Linux)
Kernel image - (Colibri-iMX6ULL_Reference-Multimedia-Image-Tezi_5.7.0+build.20 )

I am using the below boards
SOM Board : Colibri imx6ull 512MB IT
Carrier Board: iris v2.0A

Regards
Gagan Gowda G R

[ritesh.tx]

Hi @gagangowda,

Changes are already mentioned in below post. Kindly check and update device tree accordingly.

SPI slave mode for imx6ULL CoM

Hi @gagangowda, Have you made any changes to your device tree? Here is an example of SPI slave, but for Verdin iMX8M Plus: &ecspi2 { #address-cells = <0>; spi-slave; status = "okay"; /delete-property/cs-gpios; pinctrl-0 = <&pinctrl_ecspi2>; slave { compatible = "rohm,dh2228fv"; spi-max-frequency = <10000000>; status = "okay"; }; }; If you want to share the device tree and ask for help about this issue, can you please open a new ticket? this one is already closed and a bit old. B…

Best Regards
Ritesh Kumar