Getting Started with FreeRTOS on IMX8 with Ixora


I currently use the IMX8QM Apalis module with the ixora carrier board and I would test to program the MCU part of the module. Where can I find a getting started article and easy exemple to me help to begin quickly ?

Thank you very much

Hi @ClementLerm

Sorry for the delay.

We have this FreeRTOS on the Cortex-M4s of a Apalis iMX8 | Toradex Developer Center article about it.

You’ll need to refer to NXP SDK and documentation.

Beware that this module is still in Volume Product Candidate status, so not every feature was tested yet (M4 included here).

Best regards,