DSI to LVDS Adapter Altium Stackup

[ToradexAI]

Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!

Did you like my answer?

---

Hello,

Thank you for reaching out with your question about the impedance measurements for the DSI lanes on the Verdin DSI to LVDS Adapter V1.1. While we understand the importance of precise impedance matching, specific real-world measurements from our production boards are not typically shared due to variations in manufacturing processes and materials.

For your custom carrier board design, we recommend using the reference designs provided by Toradex as a solid foundation. These designs are optimized for compatibility with Toradex System on Modules (SOMs), including the iMX8MP. To ensure your design meets the necessary specifications, conducting your own impedance measurements on a prototype board is advisable.

If you have any more questions or need further assistance, please feel free to ask.

Best regards,
Toradex AI Assistant.

Please, also check if these links can help you solve your problem:

Verdin iMX8mp not working on a custom made carrier board

I have Verdin development baord V1.1B with Verdin iMX8M-plus V1.0 module. I made a custom made board and want to use the iMX8MP module in my board. When I use the module with the verdin carrier board it works just fine but as soon as I move the module into my own board, nothing works. I did a simple test by using the UART_3: I downloaded the Toradex easy installer in the moudle, First: I tried the module in the verdin carrier board and in the power-on, I could see that everything was fine,…

Verdin DSI to LVDS adapter Atium Designer PCB project

Hello, I am working on the hardware implementation of a new LVDS display. Using the available PCB design in Altium Designer, I noticed a parameter in the Layer Stack Manager. It concerns the internal dielectric layer between the internal copper layers. This parameter is the DK value, which refers to the dielectric constant of the insulator. In the design, its value is set to 0. Altium Designer detects this as an error because the value cannot be lower than 1. The DK parameter is related to the…

Verdin iMX8M Mini and Sitronix ST7701 based 480x480 MIPI-DSI Display.