Hi,
we are currently using a few custom-carrier boards based on the design of the Colibri Evaluation Board v2.1 (e.g. using the SJA1000 CAN controller on the carrier board). Now we wanted to evaluate, if we can migrate to Colibri i.MX8X modules with Linux.
- Is there a reference image for the i.MX8X + Colibri Evaluation Board v2.1?
- If building my own image via Yocto (using machine
colibri-imx8x
), are there device-tree-bindings available for the Colibri Evaluation Board v2.1?
Thanks,
Oliver