Hi @erupter ,
Yes correct. I overlooked it the first time round.
Currently the Colibri iMX6ULL is not supported by Torizon. This is due to the fact that the module is lacking RAM to launch the whole docker environment. As you correctly identified, the 1GB version will support it, but as you might have seen this product is still in development.
You are also correct about the overlays. When you say you tried with the Easy Installer, does this mean that the Easy Installer was also not displaying anything on the Parallel LCD?
The command you tried to use “setenv” is used in U-boot. So to use it you have to press a key while the module is booting. Then you can access u-boot and there you should be able to enter the “setenv” command.
Try to apply the setting in u-boot and let me know if you have an image on your display now.
Best Regards
Kevin