Colibri evaluation board v3.2: USB not working


We just bought an IMX7s module with a Colibri evaluation board.

It seems that the USB is not working on the evaluation board. I checked with the pre installed binaries (angstrom with desktop 4.1.15-v2.6b2+g0ff849d) hte LEDS are not glowing and the mouse and the keyboard seem to be turn off.

I also tried by turning the board in recovery mode and I have the same issue in Toradex Easy installer, I cannot choose which system I want to install.

Best Regards.

solved !

The Colibri iMX7S module has only one USB port. On the Colibri Evaluation Board, it is available through the shared micro USB (X30) and USB Type-B (X29) connectors