Atmel Capacitive Touch Controller initialised, but not sending events

[DaveM]

Did you see this posting?

Problems with touch controller of Capacitive Touch Display 7" Parallel under linux

Hi, I have followed the instructions here: The touch interface is connected via the adapter: [693-20171205-111500.jpg] And the pinmapping is: Adapter | Iris X1 | X16 Pin 1 <-> Pin 5 (SDA) Pin 2 <-> Pin 6 (SCL) Pin 3 <-> Pin 7 (GND) Pin 4 <-> Pin 38 (INT) Pin 5 <-> Pin 39 (RST) I have also tried connecting the 3.3V pin on the adapter but it makes no difference. I apply the following patch: diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/…