Hi Allen,
First and foremost, happy new year.
The pins specific are the following:
SODIMM pin 57 and SODIMM pin 59, the 3rd pin was a software issue.
TI AM62 ball id:
D10 and A8
I looked at the datasheet and reference manual from the Toradex modules and not from the TI AM62 chip. In the TI AM62 datasheet u send me it clearly states that the pins i am using are of pin type “IOD” meaning “IOD = Input, Output, or simultaneously Input and Output with open-drain output function”
Do the Verdin modules add an on module pull resistor for these IOD type pins or do these need to placed on the carrier board if an IOD type output if used?
Kind regards,
Richard