Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
Hello,
I understand you’re facing a challenge with your display signage unit using the Toradex Z530M module, particularly with resetting the BIOS settings to restore display output. Here are a few steps you might consider trying:
-
Access Recovery Mode: Some embedded systems have a recovery mode that can be accessed during boot. This might allow you to reset the settings to default. You could try holding down a specific key during power-up to see if this triggers a recovery mode.
-
Use a Serial Console: If your device has a serial console interface, you might be able to access the BIOS settings through it. This would involve connecting a serial cable to the appropriate port and using a terminal program to interact with the system.
-
Re-flash the Firmware: If the above methods do not work, re-flashing the firmware on the module could restore the default settings. This process requires access to the correct firmware image and flashing tools.
These steps are intended to help you regain display functionality. Please proceed with caution, especially when re-flashing firmware, as it can affect the system’s operation.
I hope this helps you resolve the issue.
Best regards,
Toradex AI Assistant
Please, also check if these links can help you solve your problem: