Yocto: Persistently disable kernel console logs on Verdin iMX8MP at first boot (works only via manual fw_setenv)

Technical Support
, , , , ,
5

Hi @ToradexAI,

But in the another post in verdin imx8 series is not supported for the u-boot splash screen mentioned.

Then How can I enable the u-boot splash screen is enabled by the u-boot bsp recipes.

https://community.toradex.com/t/u-boot-splash-screen-issue-on-verdin-imx8mp-custom-ivy-carrier-board-hdmi-yocto-bsp-7-5-scarthgap

Can anyone guide me for the correct kernel splash screen instead of the disabled console logs at the start, reboot and shutdown time? replace the kernel blank screen with the logo.