We’re testing the new revision 1.1D of Apaplis iMX6 with BSP 1.7 for WEC2013, but ethernet is not working. I think the uploaded Bsp 1.7 is missing the required changes, as it is identical to Bsp 1.6 after extracting it.
Apalis iMX6Q 1GB V1.1D
Custom Carrier Board
Custom WEC2013 OS, BSP 1.7
When using the standard WEC2013 image of Toradex we get these messages in the debug output:
Launching image at 10200000.
Toradex Windows CE 8.0 1.7
for iMX6 Built on Mar 7 2022… some lines omitted …
Ethernet: Connected at: 1000Mbps full duplex
When using our custom built OS we get these messages in the debug output:
Launching image at 10200000.
Toradex Windows CE 8.0 1.6
for iMX6 Built on Dec 23 2019… some lines omitted …
Loading Ethernet…
Done Loading Ethernet (314 ms)
Ethernet: No external PHY found
It seems like the standard image is correctly built with Bsp 1.7 but the old Bsp 1.6 was uploaded by mistake as Bsp 1.7?