Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
Based on the context provided, it seems you have followed the general procedure for booting from an SD card using the Toradex modules. However, there are a few things you might want to verify or try:
-
U-Boot Configuration: Ensure that the U-Boot environment is correctly set to boot from the SD card. You should interrupt the boot process by pressing any key within the first 2 seconds and then execute the appropriate command (
run bootcmd_mmc1for SD card) to boot from the SD card. -
Correct Files: Double-check that you have copied all necessary files to the correct partitions. The boot partition should contain the kernel image (
Image.gz), device tree files (k3-am625 dtbfiles), and any overlays if used. The root filesystem should be unpacked into the rootfs partition. -
Partition Labels: Ensure that the partitions are correctly labeled as
bootandrootfsor as required by your setup. -
Serial Output: Review the serial output for any specific error messages that might indicate what is going wrong during the boot process. This can provide clues if there are missing files or incorrect configurations.
-
Compatibility: Verify that the image and files you are using are compatible with the Verdin AM62 module and your custom carrier board.
If these steps do not resolve the issue, it might be helpful to consult the Toradex community forums or support for more specific guidance, as the context provided does not include detailed error messages or logs from the serial output.
Please, also check if these links can help you solve your problem: