Use I2S on Apalis I.MX8

[ritesh.tx]

Hi @ViralVaghela,

I believe in your case you require to use I2S as slave. Please do check below similar post for reference

I2s slave on Apalis iMX8 sai2

Hi, We are trying to setup an I2S slave on Apalis iMX8. I have added this to our custom device tree: / { codec_custom: codec_custom { compatible = "linux,snd-soc-dummy"; #sound-dai-cells = <0>; }; sound_custom { compatible = "simple-audio-card"; simple-audio-card,name = "custom"; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&custom_codec>; …

Best Regards
Ritesh Kumar