Unable to flash recovery image on VF61 Module

Hi,

I’m trying to flash the recovery image onto my Colibri VF61 module.

My steps:

  1. Put device in recovery mode.

  2. On Dev-PC, download the image and execute the following commands.

    $sudo tar xjvf Colibri-VF_Console-Image_2.8b6.184-20190401.tar.bz2
    $cd Colibri-VF_Console-Image_2.8.6/
    $./update.sh -n -d /dev/ttyUSB0
    But during the flashing I’m consistently getting the following error. I’ve tried it a dozen times. Any idea how I can get past this?

Hi @zycamedis

Please have a look here.

Thanks and best regards,
Jaski