T30 reboot error message

Toradex NVFlash Update Script


Nvflash version 2.3 started
rcm version 0X30001
System Information:
chip name: unknown
chip id: 0x30 major: 1 minor: 3
chip sku: 0xb1
chip uid: 0x0000000000000000015d90cec0441c07
macrovision: disabled
hdcp: enabled
jtag: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

Sending generated BCT…533Mhz Done
downloading bootloader – load address: 0x88300000 entry point: 0x88300000
sending file: loader.nb0

  • 65536/468652 bytes sent
    \ 468652/468652 bytes sent
    loader.nb0 sent successfully
    waiting for bootloader to initialize
    bootloader downloaded successfully
    MAC: TID=0x00142D, CID=2832984
    HW: VerMaj=1, VerMin=1, Variant=4, ProdID=23
    PROD: TestDay=738064, Testing=0, TestVer=53

Updating BCT
Sending generated BCT…RamSize=1024MB, isApalis=0, isIT=0, 533Mhz Done
setting device: 0 0
deleting device partitions
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: EB2
creating partition: IM2
creating partition: BMP
creating partition: CE6
creating partition: ARG
creating partition: REG
creating partition: USR
sending file: EBOOT.NB0

  • 65536/503568 bytes sent
    \ 503568/503568 bytes sent
    EBOOT.NB0 sent successfully
    sending file: EBOOT.NB0

  • 503568/503568 bytes sent
    EBOOT.NB0 sent successfully
    sending file: Splashscreen.bmz

  • 4426/4426 bytes sent
    Splashscreen.bmz sent successfully
    sending file: NK_CE7.NB0

  • 5046272/25903572 bytes sent
    \ 10354688/25903572 bytes sent
    | 15728640/25903572 bytes sent
    / 20840448/25903572 bytes sent

  • 25903572/25903572 bytes sent
    NK_CE7.NB0 sent successfully
    Sending Sync…
    Sync Successful
    Press any key to continue .

T30 reboot error message
Press [Space] to enter bootloader menu
Unknown product ID Version Not set. Serialno not set
Ram=1024 MB, carveout = 2MB
System Ready
Preparing for download…
Location kernel image in flash… Error+ no valid kernel signature spinforever…

How to fix this issue.

Could you please specify WInCE BSP you are trying to flash?
Please use latest (2.6) version of NVflash
Product ID and Serial No can be set using eBoot MAC config block settings.

I am using the latest

Changelog for NVFlash / Recovery Toolset

Version: 2.6

Does it mean your posted a wrong log at your first post?