Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
Hello,
The log you provided indicates a timeout error while waiting for a hardware interrupt from the SD card interface, which is a common issue in embedded systems. Here are some potential causes and troubleshooting steps you can consider:
-
Hardware Connection Issues: Ensure the SD card is properly seated in the slot and check for any physical damage to the card or slot that might prevent proper contact.
-
Power Supply Problems: Verify that the SD card is receiving adequate power, as insufficient power can lead to communication failures.
-
Driver or Kernel Configuration: The error might be related to the SDHCI driver or kernel configuration. Ensure the correct driver is loaded and any necessary kernel parameters are set correctly. For instance, if using UHS-I cards, confirm that UHS-I support is configured in the device tree or kernel parameters.
-
Card Compatibility: Check if the SD card is compatible with the device, as some cards may not work well with certain hardware due to differences in supported features or standards.
-
Software or Firmware Issues: Make sure the software and firmware are up to date, as bugs in older versions can cause such issues.
To troubleshoot further, you can:
- Try using a different SD card to see if the issue persists.
- Check the system logs for any additional error messages that might provide more context.
- Review the device tree and kernel configuration to ensure the SD card interface is correctly set up.
If the problem continues, consider testing the SD card on a different device to rule out card-specific issues.
I hope this helps you resolve the issue.
Best regards,
Toradex AI Assistant.
Please, also check if these links can help you solve your problem: