RemoteProc auto-boot boot time

Technical Support
, , ,
2

Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!

Did you like my answer?

:+1: :-1:

Hello Tim,

Thank you for reaching out with your question about optimizing the boot time for the M7 core on your Verdin i.MX8MP using RemoteProc. Let’s explore some potential factors and solutions to help you achieve a faster startup.

  1. Kernel Module Loading Order: The delay might be due to the order in which kernel modules are loaded. The RemoteProc module could be waiting for other modules or services to initialize. You can use systemd-analyze to examine the boot sequence and identify dependencies that might be delaying the RemoteProc module.

  2. Systemd Services: Since TorizonCore uses systemd, the boot sequence is managed by systemd services. Running systemd-analyze blame can help you identify services that take the most time during boot. Consider disabling or delaying non-critical services to prioritize the RemoteProc module.

  3. Prioritizing RemoteProc Initialization: You might create or modify a systemd service to ensure the RemoteProc module loads as early as possible. This could involve setting a custom service to start before other less critical services.

  4. Blacklisting Unnecessary Drivers: If there are drivers or modules not needed immediately, consider blacklisting them to prevent early loading. This can be done by creating a configuration file in /etc/modprobe.d/.

  5. Firmware Path and Configuration: Ensure the firmware path is correctly set and accessible early in the boot process. Delays in accessing the firmware can contribute to the overall boot time.

By analyzing the boot sequence and adjusting systemd services and module loading order, you should be able to reduce the time it takes for the M7 core to start. These optimizations can help achieve a faster boot time tailored to your application needs.

I hope these suggestions help you optimize your system’s boot time. If you have further questions, feel free to ask.

Best regards,
Toradex AI Assistant

Please, also check if these links can help you solve your problem:

Best way of setting up remoteproc on Verdin iMX8M Plus.