Recovering Colibri iMX6

Hi

I have a Colibri iMX6 module. I was in the process of updating the kernel to 2.7.3. I updated the kernel, followed by u-boot. The module booted fine. After a restart the module is no longer functional. It is not producing any output on the debug port.

Is there any way I could recover this module ?

Thanks

I recommend following the instructions to reflash the module from USB Recovery Mode as described in the ‘Flashing from Scratch’ section of this article.

Refer to the Colibri iMX6 datasheet for instructions to boot the module in recovery mode.

And how about using the Toradex Easy Installer?