Hi Leonardo,
The Mallow Carrier board we bought is version 1.1C. One difference we noticed is pin1 of X16 is not GND. However, that is not a problem, I took GND from another place. I don’t know if there are any other differences. I am trying to get a new LVDS display working with riverdi. I found thread:
and I made all connection, anyway I couldn’t see any lvds signals on LCD pins using osciloscope. One more thing we noticed when Malow Carrier Board start both leds diode were on green and power Led4 is red is it ok.
Best regards
Sylwester