Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
To flash your custom Yocto image to the board using the Toradex Easy Installer (TEZI), you need to ensure that your JSON configuration files are correctly formatted and point to the right image files. Here are some steps and considerations based on the context provided:
-
Validate JSON Files: Ensure that both your
image_list.jsonand theimage.jsonfiles are correctly formatted according to JSON standards. You can use an online JSON validator like jsonlint.com to check for syntax errors. -
Correct Paths: Make sure that the paths specified in your JSON files are correct and accessible. The
image_list.jsonshould correctly point to theimage.jsonfile, and theimage.jsonshould correctly point to the image files (e.g., root filesystem, kernel, etc.). -
Example JSON File: While the context does not provide a specific example JSON file, you can derive an example from the standard Linux
image.jsonfile used for Toradex modules. This typically includes properties for partition layout, file paths, and other necessary configurations. -
Configuration Format: Ensure that your
tezi_config.jsonfile is set up to add additional HTTP image sources if you are using a local network or RNDIS for distribution. This file should extend the search locations for image lists beyond the pre-configured Toradex servers. -
Error Handling: If you encounter parsing errors, double-check the JSON syntax and ensure that all required properties are included. The error message might give you a clue about what is wrong.
-
Testing: Once you have corrected the JSON files, test the setup by running TEZI in recovery mode again and see if it can successfully read and parse the JSON files.
If you need a specific example JSON file, you might need to refer to the Toradex documentation or community forums for a sample configuration that matches your setup.
Please, also check if these links can help you solve your problem: