Ixora 1.1 doesn't supply MIPI-CSI port with power

Technical Support
, , , ,
1

Hello.

I have a problem with B102 from Auvidea. This device is HDMI to CSI converter. It’s connected with FFC to Ixora board. I already backported tc358743 driver for this device.

The issue is that I don’t seem to be able to send 3V3 to this converter via CSI-MIPI port. There is no power. I followed guide from CSI Camera Module 5MP OV5640 (Linux) but I was unable to set high state. Any tips?

2

Voltage is available on the connector constantly. Please double check the design of you adopter cable between ixora and B102 board.

3

Yes, it was the cause. Cable was inserted unevenly.
Thanks.