iMX7 stopped boot after update

I installed Colibri-iMX7-eMMC_Reference-Minimal-Image-Tezi_5.2.0 using EasyInstaller. After the installation, the kernel stopped the boot process see boot.log. Some of the messages in dmesg I have never seen, like

imx7d_adc 30620000.adc: Failed getting reference voltage, err = -517

I tried to boot multiple times, sometimes (very irregular) the voltage errors disappear and the kernel boots but I see other strange error messages later in the console

[    7.143561] cpu cpu0: _set_opp_voltage: failed to set voltage (975000 975000 975000 mV): -6
[    7.152058] cpufreq: __target_index: Failed to change cpu frequency: -6

Any issue with the device tree?

Which carrier board you are using with Colibri imX7?

Have you tried to install any other OS image?

Hello @carnecro,

Is the issue resolved? or could you please kindly answer to my colleagues question about which SoM and Carrier board you are using?

BR,
Janani

We do not use Toradex anymore, sorry, I cannot remember all details.