iMX6ULL Enabling Bluetooth Error

I got this error when trying to enable Bluetooth:

root@colibri-imx6ull:~# connmanctl enable bluetooth
Error bluetooth: Method "SetProperty" with signature "sv" on interface "net.connman.Technology" doesn't exist

Here is output of lsmod command:

root@colibri-imx6ull:~# lsmod
Module                  Size  Used by
bnep                   11114  2
usb_f_rndis            15638  2
u_ether                12497  1 usb_f_rndis
btmrvl_sdio            16033  0
mwifiex_sdio           27085  0
btmrvl                 12942  1 btmrvl_sdio
mwifiex               269202  1 mwifiex_sdio
bluetooth             332268  11 btmrvl_sdio,bnep,btmrvl
cfg80211              240857  1 mwifiex
compat                 21163  6 mwifiex,btmrvl_sdio,bluetooth,bnep,mwifiex_sdio,cfg80211
mcp251x                10164  0
can_dev                12269  1 mcp251x
libcomposite           44274  10 usb_f_rndis
configfs               30757  3 usb_f_rndis,libcomposite

Here is output of “cat /sys/kernel/debug/mmc*/ios”:

root@colibri-imx6ull:~# cat /sys/kernel/debug/mmc*/ios
clock:          0 Hz
vdd:            0 (invalid)
bus mode:       2 (push-pull)
chip select:    0 (don't care)
power mode:     0 (off)
bus width:      0 (1 bits)
timing spec:    0 (legacy)
signal voltage: 0 (3.30 V)
driver type:    0 (driver type B)
clock:          50000000 Hz
actual clock:   49500000 Hz
vdd:            21 (3.3 ~ 3.4 V)
bus mode:       2 (push-pull)
chip select:    0 (don't care)
power mode:     2 (on)
bus width:      2 (4 bits)
timing spec:    2 (sd high-speed)
signal voltage: 0 (3.30 V)
driver type:    0 (driver type B)

Based on this post and this post, the SOM seems damaged. Right?

Hi @wjzhang

Could you share a picture of your module? Additionally please share the dmesg log in a text file?

Thanks and best regards,

See the attachment.module picture and dmesg log

Hi @wjzhang

Thanks for the Information you provided to us.

Nevertheless, I think, this module is damaged. We are sorry that you experience this issue.
You may fill up the RMA and mention the link to this question.

Thanks and best regards,