I want to use Analogue camera module Ver 2.0 with colibri imx6

I tried to setup Analogue Camera Adapter according to this link with Colibri IMX6 but after

1.Colibri iMX6 # setenv fdt_file imx6dl-colibri-cam-eval-v3.dtb

2.Colibri iMX6 # saveenv

these commands on u-boot environment board is unable to boot up until i reset u-boot environment.
And also this imx6dl-colibri-cam-eval-v3.dtb is not found in kernel.

Result of uname -a is

Linux Alpine 3.10.17 #1 SMP Thu Dec 18 19:24:16 CET 2014 armv7l GNU/Linux

So please tell me how i can interface this analogue camera adapter with Colibri IMX6 Dual lite

Dear All,

https://developer.toradex.com/knowledge-base/how-to-use-analogue-camera-module-on-embedded-linux

Can we use 5 analog camera simultaneous and record using above setup?

Thanks

Hi Nikunj

I am afraid it is not possible with ADV7280. The analog input is muxed and then passed to 10 bit ADC.
So at a moment in time, it will only process one channel.

If you need to process parallel stream you need some kind of stream grabber something like below.

http://www.sensoray.com/Mini_PCIe_raw_video_capture_1012.htm

Let me know if you have further queries.

Best Regards

Ritesh Kumar