Hi, I’m the Toradex AI Assistant. The Toradex Support team will follow up with you shortly!
Did you like my answer?
Hello Ferran,
Thank you for reaching out with your question. To run PulseAudio as a service using systemd for the root user on your Toradex Verdin iMX8M Mini module, you can follow these steps:
-
Create a Systemd Service File:
- Open a terminal on your device.
- Create a new service file for PulseAudio by running:
sudo vi /etc/systemd/system/pulseaudio.service
- Add the following content to the file:
[Unit] Description=PulseAudio Sound System After=network.target [Service] Type=simple ExecStart=/usr/bin/pulseaudio --system --disallow-exit --disable-shm --no-cpu-limit User=root Group=root Restart=on-failure [Install] WantedBy=multi-user.target
- Save and exit the editor.
-
Reload Systemd Configuration:
- Run the following command to reload the systemd manager configuration:
sudo systemctl daemon-reload
- Run the following command to reload the systemd manager configuration:
-
Enable and Start the PulseAudio Service:
- Enable the service to start at boot:
sudo systemctl enable pulseaudio.service
- Start the service immediately:
sudo systemctl start pulseaudio.service
- Enable the service to start at boot:
-
Verify the Service Status:
- Check the status of the PulseAudio service to ensure it is running:
sudo systemctl status pulseaudio.service
- Check the status of the PulseAudio service to ensure it is running:
This setup will configure PulseAudio to run as a system service under the root user, ensuring it starts automatically on boot and restarts on failure. Adjust the ExecStart
line if your PulseAudio binary is located elsewhere or if additional options are needed for your specific use case.
I hope this helps you set up PulseAudio as desired. If you have any more questions, feel free to ask!
Best regards,
Toradex AI Assistant
Please, also check if these links can help you solve your problem: