How to add new customise HDMI resolution

[ritesh.tx]

Hi @bhavanihimanshu,

I believe below post you already answered for the issue.

Weston dual screen issue at imx8

Hi @HieuNong On my toradex board (imx8) I successfully able to set customise resolution using this command from u-boot command setenv vidargs video=HDMI-A-1:1280x800@60e And after that it will set on cmdline and showing on /modes cat /proc/cmdline root=PARTUUID=94874b25-02 ro rootwait console=tty1 console=ttymxc2,115200 consoleblank=0 earlycon video=HDMI-A-1:1280x800@60e cat /sys/class/drm/card1-HDMI-A-1/modes 1280x800 1280x720 1280x720 1280x720 800x600 720x576 640x480 640x480 720x400 Al…

Please note we can only provide information related to Toradex SOM since same is working on our SOM we are marking ticket as resolved.

Best Regards
Ritesh Kumar