I am using v1.1c for the SoM, with Ixora V1.2A. I am running recovery-linux.sh from my Ubuntu host.
Here is the complete bootlog:
U-Boot 2020.04-5.3.0+git.7f3416a28c34 (Jul 06 2021 - 15:49:48 +0000)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
DRAM: 4 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Toradex Apalis iMX8 QuadMax 4GB IT V1.1C, Serial# 06874843
BuildInfo:
- SCFW bc122ee1, SECO-FW d63fdb21, IMX-MKIMAGE 8947fea3, ATF 835a8f6
- U-Boot 2020.04-5.3.0+git.7f3416a28c34
switch to partitions #0, OK
mmc0(part 0) is current device
Detect USB boot. Will enter fastboot mode!
Net: eth0: ethernet@5b040000
Fastboot: Normal
Boot from USB for mfgtools
*** Warning - Use default environment for mfgtools
, using default environment
Run bootcmd_mfg: select_dt_from_module_version && fastboot 0
Hit any key to stop autoboot: 0
We are in is_imx8
Getting phy ctrl
We are in is_imx8
Getting phy ctrl
No USB device found
USB init failed: -19
Apalis iMX8 TEZI #
U-Boot 2020.04-5.3.0+git.7f3416a28c34 (Jul 06 2021 - 15:49:48 +0000)
CPU: NXP i.MX8QM RevB A53 at 1200 MHz
DRAM: 4 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Toradex Apalis iMX8 QuadMax 4GB IT V1.1C, Serial# 06874843
BuildInfo:
- SCFW bc122ee1, SECO-FW d63fdb21, IMX-MKIMAGE 8947fea3, ATF 835a8f6
- U-Boot 2020.04-5.3.0+git.7f3416a28c34
switch to partitions #0, OK
mmc0(part 0) is current device
Detect USB boot. Will enter fastboot mode!
Net: eth0: ethernet@5b040000
Fastboot: Normal
Boot from USB for mfgtools
*** Warning - Use default environment for mfgtools
, using default environment
Run bootcmd_mfg: select_dt_from_module_version && fastboot 0
Hit any key to stop autoboot: 0
We are in is_imx8
Getting phy ctrl
We are in is_imx8
Getting phy ctrl
No USB device found
USB init failed: -19
Apalis iMX8 TEZI #