Does the colibri-imx6dl version number (i.e. 1.1A. 1.1Y etc.) appear anywhere under BSP v5.x Linux?

We now have two generations of imx6DL SOMs for the same product/firmware. We do not use the ST touch screen controller making the swap straightforward. However, we would like to distinguish the two versions in our application. Is there a /proc variable we can query to determine the version number of the SOM?

Hi @cd25,

Please, try the following commands:

# cat /proc/device-tree/serial-number
# cat /proc/device-tree/model
# cat /proc/device-tree/toradex,product-id
# cat /proc/device-tree/toradex,board-rev

This will print your hardware information. I hope this helps.

Best Regards,
Hiago.

Thanks - that works!