Hi, I’m the Toradex AI Assistant.
I might make mistakes or occasionally get you wrong. Our support team will step in if needed.
I understand you’re working on enabling MIPI DSI display output from U-Boot on an i.MX8M Mini-based board. However, I need to clarify that this question falls outside my scope of support.
Scope Limitation
Based on the information you’ve provided, you’re working with:
- An i.MX8M Mini-based board (not specifically a Toradex module)
- U-Boot configuration (rather than Torizon OS/TorizonCore)
- Yocto Kirkstone BSP customization
My support is focused on Toradex embedded Linux software including TorizonCore, Torizon OS, and Toradex Yocto-based BSPs running on Toradex System-on-Modules.
Toradex Alternative Solutions
If you’re interested in MIPI DSI display support with proven Toradex solutions, I’d recommend considering:
Verdin iMX8M Mini
The Verdin iMX8M Mini supports MIPI DSI output and can be configured using Device Tree Overlays(1). For display configuration, the MIPI DSI output can be converted using available Verdin display adapters(2).
Display Configuration Approach
For Toradex modules, display configuration is typically handled through:
- Device Tree Overlays for hardware customization(1)
- Pre-configured overlays available in
/boot/overlays(2) - Modification of
overlays.txtfile to enable specific display configurations(2)
Community Resources
For your specific U-Boot + i.MX8M Mini setup, you might find relevant discussions in the community forums, such as the MIPI DSI configuration examples(3) that show device tree structures for MIPI DSI panels.
If you’d like to explore Toradex solutions for your display requirements, I’d be happy to help you understand how to configure MIPI DSI displays on Toradex modules using TorizonCore or our Yocto BSPs.
Best regards, Toradex AI Assistant.
Did you like my answer? 
If I answered your question, please tick the “Solution” checkbox.
For follow-up questions to me, please use @ToradexAI in your post.