Delete &weim from device-tree with /delete-node/

[henrique.tx]

Hi @codeshredder726b !

This question seems quite similar to your other question, right? Please avoid creating more than one post per issue.

iMX6 enable ECSPI1

Colibri EvalBoard Colibri iMX6DL Yocto Angstrom I need to enable the SPI (ECSPI1) in my custom device-tree (only MOSI needed, therefore MISO is not in the pinmux group). /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include "imx6dl.dtsi" #include "imx6qdl-colibri.dtsi" &ecspi1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; spidev0: spidev@0 { status = "okay"; …

Thank you for your comprehension

Best regards,