So if I want to set the IP address static from the beginning, which way would you suggest? We use the devices in machines resp. shop floor and there you rarely have DHCP servers at least from my expierence.
We have an article on setting a static network configuration: Networking with Torizon OS | Toradex Developer Center
By Serial debug port you mean the USB connection? I do have this connection, I loaded the Easyinstaller with this into the memory (unplugged the jumper JP3 and pressed the buttons after powering on).
USB connection yes, but not the same USB connection you used for Easy Installer. We have an article on this as well: Configuring Serial Port Debug Console (Linux/U-Boot) | Toradex Developer Center
This let’s you access the device’s console/terminal without any display attached.
Best Regards,
Jeremias