Colibri UART_C RX/TX mix-up?

In Colibri iMX8X datasheet table 5-29 it says

19    UART_C RXD    UART2_TX    ADMA.UART2.TX    I    Received Data
21    UART_C TXD    UART2_RX    ADMA.UART2.RX    O    Transmitted Data

Is the “Colibri STD function” really the opposite of “i.MX 8X function” and “ball name”? It differs from the other UARTs. Or is it an error?

Thank you!

Hello tuomas86,

you are right this is a typo in table 5-29. We will correct that.

Best Regards,
Matthias Gohlke