Cog container unstable on Torizon OS 7

[henrique.tx]

Hi @vix !

A quick comeback here regarding the native HDMI issue you stumbled upon:

@vix

• using a Verdin Dev Board, instead of Yavia works in the same way (i.e., native HDMI shows nothing, DSI-HDMI shows only the weston blue background)
• if I boot the SoM without any HDMI cable connected, and then I plug HDMI cable after the boot, DSI-HDMI works perfectly and I see cog over weston. The native HDMI doesn’t work in any case.

While this problem is being worked on, a workaround was found. Please check it on my message here:

HDMI Screen blank after Torizon Os installation

Hi @AnuragBluAI ! Welcome to Toradex Community! Feel free to browse around! Are you using Since you are on Mallow, you are using the X14 HDMI connector, which is the native HDMI. Currently, on Torizon OS 7, a bug on Weston container was found and it is being worked on. A current workaround is to set WESTON_DISABLE_ATOMIC=1. For instance: docker container run -d --name=weston --net=host --cap-add CAP_SYS_TTY_CONFIG -v /dev:/dev -v /tmp:/tmp -v /run/udev/:/run/udev/ …

Best regards,